Configuration Instructions
Requirements
You must be a faculty, staff, or student at UVa to follow these instructions, and your computer must have Wi-Fi certified wireless card (how to tell). If you are a guest of the University or are setting up wireless access for a guest, please see the guest access instructions.
Setup Options
There are 3 options for setting up your access to the UVa cavalier wireless network:
- Use Option 1 for the automated Network Setup Tool with a wireless connection, which works for these operating systems: Windows Vista and XP, and Mac OS X 10.5 (Leopard) and 10.4 (Tiger).
- Use Option 2 for the automated Network Setup Tool with a wired connection, which works for the same operating systems: Windows Vista and XP, and Mac OS X 10.5 (Leopard) and 10.4 (Tiger).
- Use Option 3 for manual setup or for other operating systems.
Option 1: Use the Automated Tool with a Wireless Connection
- Connect to the Welcome_to_UVa_Wireless network:
On Windows Vista: Select “Connect To” from the Start Menu, or right-click on the computer monitor icon in the system tray and select “Connect to a network.” Select Welcome_to_UVa_Wireless from the list and click “Connect.” Then click “Connect Anyway” (since after the setup tool finishes, you will no longer be on an unsecured network).
On Windows XP: Click on the “Wireless networks detected” popup in the bottom right-hand corner of your screen, or right-click on the computer monitor icon in the system tray and select “View Available Wireless Networks.” Select Welcome_to_UVa_Wireless from the list and click “Connect.” Then click “Connect Anyway” (since after the setup tool finishes you will no longer be on an unsecured network).
- Once you're connected to Welcome_to_UVa_Wireless, open a Web browser, and you'll be automatically directed to the ITC Network Setup Tool download site. Note: A link to some “Troubleshooting Tips” is located on the right-hand side of this page, if needed.
- From there, download and run the appropriate ITC Network Setup Tool for your system. The Tool will configure your computer to access the encrypted UVa wireless network cavalier. If at any time you have problems with wireless, you may be able to repair them by running the Tool again.
Option 2: Use the Automated Tool with a Wired Connection
- While your computer is already connected to the Internet via a wired, Ethernet connection, go to the ITC Network Setup Tool download site.
- From there, download and run the appropriate ITC Network Setup Tool for your system. The Tool will configure your computer to access the encrypted UVa wireless network cavalier. If at any time you have problems with wireless, you may be able to repair them by running the Tool again.
Option 3: Configure Manually Using Instructions for Your Operating System
This will require first connecting to the UVa network with a wired connection.
- Mac OS X 10.5 (Leopard)
- Mac OS X 10.4 (Tiger)
- Mac OS X 10.3 (Panther)
- Windows Vista
- Windows XP
- Other operating systems and older Mac and Windows versions (unencrypted)*
*ITC provides limited support for these operating systems to connect to the unencrypted wireless network.


